ALUCOBEST® idatha sheet
4mm 0.50AL Iphaneli ye-Aluminium Composite
1.Product ukwakheka
ALUCOBESTIphaneli ye-aluminium eyinhlanganisela ye-® ine-LDPE(Low-Density Polyethylene) ehlanganiswe phakathi kwezikhumba ezimbili ze-aluminium alloy engu-0.5mm (3003 noma 5005).
| Ukwakheka | Izinto zokumboza: | I-PVDF |
| Izinto zesikhumba: | 0.5 mm ubukhulu | |
| Okubalulekile: | I-LDPE |
Ingaphezulu liqediwe nge-PVDF enamathelayo esezingeni eliphezulu njengokujwayelekile, uhlangothi olungemuva luyi-aluminium yokuqeda isigayo noma ukumbozwa kwesevisi nge-polyester.
2. Product diukugula futhi ukubekezelelana
(1) Ubukhulu bephaneli: 4 mm
(2) Usayizi wephaneli: Ububanzi obujwayelekile = 1220mm, 1250mm
Ububanzi obukhethekile =1500mm, 1550mm, 2000mm
Ubude = ngaphansi kuka-6000 mm
Qaphela: Ubude obungokwezifiso bungamukelwa
(3) Ukubekezelelana komkhiqizo
Ububanzi: ±2.0 mm
Ubude: ±3.0 mm
Ubukhulu: ±0.2 mm
Umnsalo: Ubukhulu obungu-0.5% (5mm/m) bobude noma ububanzi be-Squareness (umehluko we-diagonal): Ubukhulu obungu-5.0 mm
- Primisebenzi
1) Izakhiwo zemishini ye-Aluminium Composite Material (ACM):
| Into yokuhlola | Okujwayelekile | Umphumela |
| Isisindo Seyunithi | I-ASTM D792 | 5.81kg/m2 |
| Ukumelana Nokushisa Kwangaphandle | I-ASTM D1654 | Akukho Ukungajwayelekile |
| Ukunwetshwa kwe-Thermal | I-ASTM D696 | 3.0×10-5 /°C |
| Thermal deformation Temperature | I-ASTM D648 | 115°C |
| Ukuqhuba Okushisayo | Idatha ye-ASTM976 | 0.102 kcal/m.hr°C |
| Ukuqina kwe-Flexural | I-ASTM C393 | 14.0 x 105 |
| Ukumelana nomthelela | I-ASTM D732 | 20kg.cm |
| Amandla okunamathela | I-ASTM D903 | 0.74kgf/mm |
| Izinga lokuvikela umsindo | I-ASTM E413 | 29db |
| I-Flexural Elasticity | I-ASTM D790 | 4055kg/mm2 |
| Ukumelana ne-Shear | I-ASTM D732 | 2.6 kgf/mm2 |
| Irediyasi encane yokugoba | I-ASTM D790 | > = 300mm |
| Ukusabalalisa umlilo | I-ASTM E84 | Ufanelekile |
| Kwashunqa intuthu | I-ASTM E84 | <45 |
| Ukumelana Nokucindezela Komoya | I-ASTM E330 | Kuphasisiwe |
| Izakhiwo ngokumelene namanzi | I-ASTM E331 | Kuphasisiwe |
| Izakhiwo ngokumelene ne-Air | I-ASTM E283 | Kuphasisiwe |
(2) I-PVDF Coating Qeda
| Into yokuhlola | Okujwayelekile | Umphumela |
| Qeda Ukuqina Kwejazi | I-ISO 2360(CNS 8406) | = 26 um |
| Ukucwebezela | I-ASTM D523-99 | 20-45% |
| Ukuqina kwepensela | I-ASTM D3363-00 | 2H |
| Ukuqina | I-ASTM D4145-83 | 2T akukho ukuhlukana |
| Amandla okunamathela | I-ASTM D3359-97 | 4B |
| Ukumelana nomthelela | I-ASTM D2794-93 | > 100kg.cm |
| Ukumelana nemihuzuko | I-ASTM D968-93 | 64.6L/mil |
| Ukumelana Nodaka | I-ASTM D605.2-91 | Amahora angu-24 akukho blister |
| Ukumelana nomswakama | I-ASTM D714-97;ASTM D2247-02 | 3000hrs akukho blister |
| Ukumelana namanzi abilayo | I-ASTM D3359-B | Kuphasisiwe |
| Ukumelana nosawoti-Spray | I-ASTM B117-03 | 3000hrs akukho blister |
| Ukumelana ne-Acid | I-ASTM D1308-87 AAMA 605.2-91 TEST #7 7.31 | Awukho Umthelela |
| Ukumelana ne-alkali | I-ASTM D1308-87 | Kuphasisiwe |
| Ukumelana ne-solvent | I-ASTM D2248-73 I-ECCA T5&NCCA NO.11-18 | Kuphasisiwe |
| Ukugcina umbala | I-ASTM D2244-93 | △E=0.34 |
| Ukumelana ne-Chalk | I-ASTM D4214-98 | Akukho Chalking |
| Ukugcinwa Kwecwebezelayo | I-ASTM D2244-93 | 84.2% |