Takelaka data ALUCOBEST®
4mm 0.50AL Aluminium Composite Panel
1.Product fifehezan
ALUCOBEST® aluminium composite tontonana dia manana LDPE (Low-Density Polyethylene) fototra sandwiched eo anelanelan'ny hoditra roa 0.5mm hateviny aluminium firaka (3003 na 5005).
| fifehezan | Fitaovana coating: | PVDF |
| Fitaovana hoditra: | 0,5 mm ny hateviny | |
| Fitaovana fototra: | LDPE |
Ny ety dia vita amin'ny coating PVDF avo lenta toy ny mahazatra, ny lafiny aoriana dia vita amin'ny aluminium vita amin'ny fikosoham-bary na serivisy vita amin'ny polyester.
2. Product difilazana SY fandeferana
(1) hatevin'ny tontonana: 4 mm
(2) Haben'ny tontonana: Ny sakany mahazatra = 1220mm, 1250mm
Sakany manokana = 1500mm, 1550mm, 2000mm
Halava = latsaky ny 6000 mm
Fanamarihana: Ny halavany manokana dia azo ekena
(3) Fandeferana vokatra
sakany: ± 2.0 mm
Halavany: ±3.0 mm
Haavo: ± 0.2 mm
Bow: 0,5% (5mm/m) ambony indrindra amin'ny lavany na ny sakany Squareness (fahasamihafana amin'ny diagonaly): 5,0 mm ambony indrindra
- Properties
1) Toetran'ny mekanika an'ny Aluminum Composite Material (ACM):
| Zavatra andrana | Malagasy | vokany |
| Lanja iray | ASTM D792 | 5,81kg/m2 |
| Fiatrehana mari-pana any ivelany | ASTM D1654 | Tsy misy Abnormity |
| Fanitarana Thermal | ASTM D696 | 3.0×10-5 /°C |
| Thermal deformation Temperature | ASTM D648 | 115°C |
| Conduction mafana | ASTM 976 | 0,102 kcal/m.hr°C |
| Henjana flexural | ASTM C393 | 14.0 x 105 |
| Fanoherana ny fiantraikany | ASTM D732 | 20 kg.sm |
| Hery adhesive | ASTM D903 | 0,74 kgf/mm |
| Ny tahan'ny insulating feo | ASTM E413 | 29dB |
| Elasticité flexural | ASTM D790 | 4055kg/mm2 |
| Hetezana fanoherana | ASTM D732 | 2,6 kgf/mm2 |
| radius fiolahana ambany indrindra | ASTM D790 | >=300mm |
| Fanaparitahana afo | ASTM E84 | mahay |
| Nivoatra ny setroka | ASTM E84 | <45 |
| Ny fanoherana ny rivotra | ASTM E330 | lasa |
| Properties manohitra ny rano | ASTM E331 | lasa |
| Properties manohitra ny Air | ASTM E283 | lasa |
(2) PVDF coating vita
| Zavatra andrana | Malagasy | vokany |
| Haben'ny palitao vita | ISO 2360(CNS 8406) | >=26um |
| Gloss | ASTM D523-99 | 20-45% |
| Ny hamafin'ny pensilihazo | ASTM D3363-00 | 2H |
| diso mikasika ny Fahasarotana | ASTM D4145-83 | 2T tsy misy ratra |
| Hery adhesive | ASTM D3359-97 | 4B |
| Fanoherana ny fiantraikany | ASTM D2794-93 | >100kg.cm |
| Ny fanoherana ny abrasion | ASTM D968-93 | 64,6L/mil |
| Resistance Mortar | ASTM D605.2-91 | 24 ora tsy misy blister |
| fanoherana ny hamandoana | ASTM D714-97; ASTM D2247-02 | 3000h tsy misy blister |
| fanoherana ny rano mangotraka | ASTM D3359-B | lasa |
| Ny fanoherana ny sira-Spray | ASTM B117-03 | 3000h tsy misy blister |
| fanoherana asidra | ASTM D1308-87 AAMA 605.2-91 TEST #7 7.31 | Tsy misy vokany |
| Alkali fanoherana | ASTM D1308-87 | lasa |
| Ny fanoherana solvent | ASTM D2248-73 ECCA T5&NCCA NO.11-18 | lasa |
| Fihazonana loko | ASTM D2244-93 | △E=0.34 |
| fanoherana tsaoka | ASTM D4214-98 | Tsy misy Chalking |
| Fihazonana Gloss | ASTM D2244-93 | 84,2% |