ALUCOBEST® notitia sheet
4mm 0.50AL Aluminium composita Panel
1.Prproduct compositio
ALUCOBEST® aluminium compositum tabula habet LDPE (Density Polyethylene Low-) nucleum fartum inter duas pelles 0,5mm crassi aluminii mixturae (3003 vel 5005).
| Compositio | Materia efficiens: | PVDF |
| Materia cutis: | 0.5mm crassus | |
| Core materia: | LDPE |
Superficies PVDF ut vexillum efficiens cum summo operatione perficitur, latera posterior est mola aluminii absolutio seu operatio polyester.
2. Prproduct dimension et tolerantia
(1) Panel crassities: 4 mm
(2) Panel size: Standard Latitudo = 1220mm,1250mm
Praecipua Latitudo = 1500mm, 1550mm, 2000mm
Longitudo = minus quam (VI) mm
Nota: Consuetudinem longitudo accipi potest
(III) Product tolerantia
Latitudo: ±2.0 mm
Longitudo: ±3.0 mm
Crassitudo: ±0.2 mm
Arcum: Maximum 0.5% (5mm/m) longitudinis vel latitudinis Squareness (differentia diagonalis): Maximum 5.0 mm
- Properationes
1) Mechanica Aluminii Materia composita (ACM);
| Testis Item | Standard | Proventus |
| Unit Pondus | ASTM D792 | 5.81kg/m2 |
| Velit Temperature Resistentia | ASTM D1654 | Non deprauationem |
| Scelerisque Expansion | ASTM D696 | 3.0×10-5 /°C |
| Scelerisque deformatio Temperature | ASTM D648 | 115°C |
| Scelerisque Conduction | ASTM 976 | 0.102 kcal/m.hr°C |
| Flexurae rigoris | ASTM C393 | 14.0 x 105 |
| Repugnantia impulsum | ASTM D732 | 20kg.cm |
| tenaces vires | ASTM D903 | 0.74kgf/mm |
| Sonus-insulating rate | ASTM E413 | 29dB |
| Flexuralis Elasticitas | ASTM D790 | 4055kg/mm2 |
| tondendas resistentia | ASTM D732 | 2.6 kgf/mm2 |
| Minimum inflexio radii | ASTM D790 | >=300mm |
| Ignis propagatio | ASTM E84 | secundum quid |
| fumus developed | ASTM E84 | <45 |
| Ventus Pressura Repugnantia | ASTM E330 | Transierunt |
| Possessiones contra aquam | ASTM E331 | Transierunt |
| Possessiones in Air | ASTM E283 | Transierunt |
(2) PVDF Coating Perfice
| Testis Item | Standard | Proventus |
| tunica consummare Crassitudo | ISO 2360(CNS 8406) | >=26um |
| Glossa | ASTM D523-99 | 20-45% |
| Plumbum duritia | ASTM D3363-00 | 2H |
| lentitudo | ASTM D4145-83 | 2T non alienavit |
| Tenaces vis | ASTM D3359-97 | 4B |
| Repugnantia impulsum | ASTM D2794-93 | >100kg.cm |
| Abrasio resistentia | ASTM D968-93 | 64.6L/mil |
| Mortarium resistentia | ASTM D605.2-91 | 24hrs non pustula |
| Repugnantia Umor | ASTM D714-97;ASTM D2247-02 | 3000hrs non pustula |
| resistentia aquae ferventis | ASTM D3359-B | Transierunt |
| Sal-Spray resistentia | ASTM B117-03 | 3000hrs non pustula |
| Acidum resistentia | ASTM D1308-87 AAMA 605.2-91 TEST #7 7.31 | Nullus effectus |
| Alkali resistentia | ASTM D1308-87 | Transierunt |
| Resistentia solvendo | ASTM D2248-73 ECCA T5&NCCA NO.11-18 | Transierunt |
| Color retentionis | ASTM D2244-93 | E=0.34 |
| Creta resistentia | ASTM D4214-98 | Non Chalking |
| Glossa retentionis | ASTM D2244-93 | 84.2% |