ALUCOBEST® data sheet
4mm 0.50AL Aluminium Composite Panel
1.Product komposysje
ALUCOBEST® aluminium gearstalde paniel hat in LDPE (Low-Density Polyethylene) kearn sandwiched tusken twa skins fan 0.5mm dikke aluminium alloy (3003 of 5005).
| Gearstalling | Coating materiaal: | PVDF |
| Skin materiaal: | 0,5 mm dik | |
| Kearn materiaal: | LDPE |
It oerflak is ôfmakke mei in hege-optreden PVDF coating as standert, efterkant is mill finish aluminium of service coating troch polyester.
2. Product dimension en tolerânsje
(1) Panel dikte: 4 mm
(2) Panel grutte: Standert Breedte = 1220mm, 1250mm
Spesjale breedte = 1500mm, 1550mm, 2000mm
Lengte = minder as 6000 mm
Opmerking: Oanpaste lingte kin wurde akseptearre
(3) Produkt tolerânsje
Breedte: ± 2,0 mm
Lingte: ± 3,0 mm
Dikte: ± 0,2 mm
Bôge: Maksimum 0,5% (5mm / m) fan de lingte of breedte Squareness (diagonaal ferskil): Maksimum 5,0 mm
- Properaasjes
1) Mechanyske eigenskippen fan aluminium gearstalde materiaal (ACM):
| Test item | Standert | Resultaat |
| Unit Gewicht | ASTM D792 | 5,81 kg/m2 |
| Outdoor Temperatur Resistance | ASTM D1654 | Gjin abnormaliteit |
| Termyske útwreiding | ASTM D696 | 3.0×10-5 /°C |
| Termyske deformation Temperatuer | ASTM D648 | 115°C |
| Thermyske conduction | ASTM 976 | 0,102 kcal/m.hr°C |
| Flexural rigidity | ASTM C393 | 14,0 x 105 |
| Impact ferset | ASTM D732 | 20 kg.cm |
| Adhesive sterkte | ASTM D903 | 0,74 kgf/mm |
| Sound-isolearjende taryf | ASTM E413 | 29dB |
| Flexural elastisiteit | ASTM D790 | 4055 kg/mm2 |
| Ferset tsjin skea | ASTM D732 | 2,6 kgf/mm2 |
| Minimale bochtradius | ASTM D790 | >= 300 mm |
| Fjoer fuortplanting | ASTM E84 | Kwalifisearre |
| Smoken ûntwikkele | ASTM E84 | <45 |
| Wind-Pressure Resistance | ASTM E330 | Passearre |
| Eigenskippen tsjin wetter | ASTM E331 | Passearre |
| Eigenskippen tsjin Air | ASTM E283 | Passearre |
(2) PVDF Coating Finish
| Test item | Standert | Resultaat |
| Finish Coat Dikte | ISO 2360 (CNS 8406) | >=26um |
| Gloss | ASTM D523-99 | 20-45% |
| Potlead hurdens | ASTM D3363-00 | 2H |
| Toughness | ASTM D4145-83 | 2T gjin skeel |
| Adhesive krêft | ASTM D3359-97 | 4B |
| Impact ferset | ASTM D2794-93 | >100 kg.cm |
| Abrasion ferset | ASTM D968-93 | 64,6 l/mil |
| Mortel Resistance | ASTM D605.2-91 | 24 oeren gjin blister |
| Feuchte ferset | ASTM D714-97;ASTM D2247-02 | 3000 oeren gjin blister |
| Siedend wetter ferset | ASTM D3359-B | Passearre |
| Sâlt-Spray ferset | ASTM B117-03 | 3000 oeren gjin blister |
| Acid ferset | ASTM D1308-87 AAMA 605.2-91 TEST #7 7.31 | Gjin effekt |
| Alkali ferset | ASTM D1308-87 | Passearre |
| Solvent ferset | ASTM D2248-73 ECCA T5 & NCCA NO.11-18 | Passearre |
| Kleurbehâld | ASTM D2244-93 | △E=0.34 |
| Kryt ferset | ASTM D4214-98 | Gjin Krijt |
| Gloss Retention | ASTM D2244-93 | 84.2% |